Set Poe Power Maxvalue - Zte ZXR10 2900E Series Command Reference Manual

ZXR10 2900E Series Command Reference
Parameter Description
Parameter
<portlist>
enable
disable
Guidelines
If the extend-detection function is enabled, power supply will be provided for ports when
non-standard PD devices (such as Cisco high-capacity devices) are detected. If the
extend-detection function is disabled, power supply will be provided for ports only when
standard PD devices are detected.
Default
The extend-detection function is disabled.
Example
The following example enables the extend-detection function for port 3:
zte(cfg)#set poe port 1/3 extend-detection enable

4.3.6 set poe power maxvalue

Purpose
This command sets the maximum output power and protection threshold for the switch.
Command Mode
Global configuration mode
Syntax
set poe power maxvalue <1-500>[threshold <0-30>]
Parameter Description
Parameter
<1-500>
<0-30>
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Port list.
Enables the extend-detection function.
Disables the extend-detection function.
Description
Maximum output power. Different switches have different ranges.
For example, if a 2918E-PS switch does not support POE, this
parameter value is <1-0>.
Protection threshold.
4-66
ZTE Proprietary and Confidential