Example
The following example shows MAC peak value informations, including the MAC and the
maximum value and the utilization rate of CPU.
zte(cfg)#show mac peak
Index
------------------------------------------------------
0
1
2
3
4
4.7.43 show mac protect
Purpose
This command shows the MAC protection configuration and protection state.
Command Mode
All configuration modes
Syntax
show mac protect
Guidelines
The state (enabled or disabled) of the MAC protection function, protection triggering
configuration, and protection state are displayed.
4.8 MAC Authentication Configuration
4.8.1 aaa-control mac-authentication
Purpose
This command enables or disables the MAC authentication function.
Command Mode
NAS configuration mode
Syntax
aaa-control mac-authentication {enable | disable }
SJ-20130731155059-003|2013-11-27 (R1.0)
Number
Cpuratio
16384
14.0%
Thu Jul
16384
50.8%
Thu Jul
16384
15.4%
Thu Jul
16384
38.4%
Thu Jul
16384
47.5%
Thu Jul
Chapter 4 Service Configuration
Time
1 19:20:20 2004
1 00:18:39 2004
1 04:15:35 2004
1 02:41:01 2004
1 00:03:05 2004
4-117
ZTE Proprietary and Confidential