Debug Protocol Layer3 Ip Enable/Disable; Debug Protocol Layer3 Ip Port - Zte ZXR10 2900E Series Command Reference Manual

Parameters
Parameter
enable
disable
Defaults
By default, the debug function of the dot1x module is disabled.

4.47.11 debug protocol layer3 ip enable/disable

Function
This command enables or disables the debug function of layer 3 IP messages.
Mode
Global configuration
Syntax
debug protocol layer3 ip {enable | disable}
Parameters
Parameter
enable
disable
Defaults
By default, the debug function of layer 3 IP messages is disabled.
Usage Guidelines
The message information to be observed includes the link-mtu parameter of the IP port,
MAC address for receiving messages, and size of the messages.

4.47.12 debug protocol layer3 ip port

Function
This command shows statistical data of all ip ports.
Mode
Global configuration
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Enables the debug function of the dot1x module.
Disables the debug function of the dot1x module.
Description
Enables the debug function of layer 3 IP messages.
Disables the debug function of layer 3 IP messages.
4-617
Chapter 4 Service Configuration
ZTE Proprietary and Confidential