Show Anti-Dos - Zte ZXR10 2900E Series Command Reference Manual

ZXR10 2900E Series Command Reference
Parameter Description
Parameter
<1-28>
Example
The following example shows the egress shaping configuration of port 1:
zte(cfg)#show qos traffic-shaping port 1
Port Egress Traffic Shaping Table:
Port ID : 1
Port Shaping Rate (Kbps)
Queue 0 Shaping Rate (Kbps) : No-Limit
Queue 1 Shaping Rate (Kbps) : No-Limit
Queue 2 Shaping Rate (Kbps) : No-Limit
Queue 3 Shaping Rate (Kbps) : No-Limit
Queue 4 Shaping Rate (Kbps) : No-Limit
Queue 5 Shaping Rate (Kbps) : No-Limit
Queue 6 Shaping Rate (Kbps) : No-Limit
Queue 7 Shaping Rate (Kbps) : No-Limit

4.14.40 show anti-dos

Purpose
This command shows the anti-DOS configuration.
Command Mode
All configuration modes
Syntax
show anti-dos
Example
The following example shows anti-DOS configuration:
zte(cfg)#show anti-dos
anti-dos is enable
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Port number. Different devices have different port number ranges.
In the syntax, the 2928E device is used as an example.
: No-Limit The Burst Size
The Burst Size
The Burst Size
The Burst Size
The Burst Size
The Burst Size
The Burst Size
The Burst Size
The Burst Size
4-332
: N/A
: N/A
: N/A
: N/A
: N/A
: N/A
: N/A
: N/A
: N/A
ZTE Proprietary and Confidential