Set Lacp Enable/Disable; Set Lacp Aggregator Port - Zte ZXR10 2900E Series Command Reference Manual

ZXR10 2900E Series Command Reference
Syntax
set trunk <trunklist> pvid <1-4094>
Parameter Description
Parameter
<trunklist>
<1-4094>
Example
The following example sets the PVID of trunks 1, 2, 3 to 1000:
zte(cfg)#set trunk 1-3 pvid 1000

4.9.2 set lacp enable/disable

Purpose
This command enables or disables the Link Aggregation Control Protocol.
Command Mode
Global configuration mode
Syntax
set lacp {enable | disable}
Parameter Description
Parameter
enable
disable
Default
The LACP is disabled.

4.9.3 set lacp aggregator port

Purpose
This command adds/deletes the desired ports to/from the specified LACP aggregator.
Command Mode
Global configuration mode
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Trunk list
Default VLAN ID, any number from 1 to 4094
Description
Enables the LACP.
Disables the LACP.
4-122
ZTE Proprietary and Confidential