Set Group Holdtime; Set Group Name - Zte ZXR10 2900E Series Command Reference Manual

ZXR10 2900E Series Command Reference

5.6.26 set group holdtime

Purpose
This command sets the holding time of cluster information on member switches.
Command Mode
Cluster management configuration mode
Syntax
set group holdtime <1-300>
Parameter Description
Parameter
<1-300>
Default
The default setting is 80 seconds.

5.6.27 set group name

Purpose
This command sets the cluster name.
Command Mode
Cluster management configuration mode
Syntax
set group name <name>
Parameter Description
Parameter
<name>
Example
The following example sets the cluster name to ZXR10-ECARRIER:
Cmdr.zte(cfg-group)#set group name ZXR10-ECARRIER
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Holding time (seconds) of cluster information on member switches.
Description
Cluster name, containing a maximum of 32 characters.
5-54
ZTE Proprietary and Confidential