Syntax
iptv port <portlist>[vlan <1-4094>] service {start | remove | pause | resume}
Parameters
Parameter
<portlist>
vlan <1-4094>
start
remove
pause
resume
Guidelines
If the VLAN ID is not set, the command sets the global service status.
Default
Services are cancelled.
Example
The following example starts services of port 1 in VLAN 1000:
zte(cfg-nas)#iptv port 1 vlan 1000 service start
4.11.33 iptv port control-mode
Purpose
This command sets a multicast control mode.
Command Mode
NAS configuration mode
Syntax
iptv port <portlist>[vlan <1-4094>] control-mode {package | channel}
Parameter Description
Parameter
<portlist>
vlan <1-4094>
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Port list.
VLAN ID.
Starts services. The service data takes effect.
Cancels services to clear service data.
Pauses services to reserve the service data.
Restores services.
Description
Port list.
VLAN ID.
4-173
Chapter 4 Service Configuration
ZTE Proprietary and Confidential