Set Ipv6Port Ipv6Address - Zte ZXR10 2900E Series Command Reference Manual

Syntax
set ipv6port <0> vlan <1-4094>
Parameter Description
Parameter
<0>
<1-4094>

4.18.2 set ipv6port ipv6address

Purpose
This command sets the IPv6 address for an IPv6 layer-3 port and the prefix length of the
address.
Command Mode
Layer-3 configuration mode
Syntax
set ipv6port <0> ipv6address {<ipv6Addr/M>|<ipv6Addr><wildcard>}
Parameter Description
Parameter
<0>
<ipv6Addr/M>
<ipv6Addr>
<wildcard>
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Number of an IPv6 layer-3 port. The current value is 0.
VLAN ID.
Description
Number of an IPv6 layer-3 port. The current value is 0.
IPv6 address/length of the address prefix. An IPv6 128-bit
address is represented as a series of eight 16-bit hexadecimal
fields separated by colons in the format of n:n:n:n:n:n:n:n, for
example, 12ab:08CD:0000:0000:0000:0000:0000:0012. For easy
implementation, leading zeros in each field are optional. The IPv6
address above also can be expressed as 12ab:8CD:0:0:0:0:0:12.
You can also use two colons (::) to represent successive
hexadecimal fields of zeros so that the IPv6 address above also
can be expressed as 12ab:8CD::12. The length of an address
prefix is a number in the range of 1 to 128.
IPv6 address, such as 12ab:8CD::12.
Length of an IPv6 address prefix, in the range of 1 to 128, for
example, 64.
4-369
Chapter 4 Service Configuration
ZTE Proprietary and Confidential