ZXR10 2900E Series Command Reference
Parameter
disable
Example
The following example configures ports 1, 2, 3, and 4 as customer ports:
zte(cfg)#set vlan qinq customer port 1-4 enable
4.21.2 set vlan qinq uplink port
Purpose
This command adds/deletes the uplink ports of QinQ.
Command Mode
Global configuration mode
Syntax
set vlan qinq uplink port <portlist>{enable | disable}
Parameter Description
Parameter
<portlist>
enable
disable
Example
The following example configures port 24 as an uplink port:
zte(cfg)#set qinq uplink port 24 enable
4.21.3 set vlan egress-tpid session
Purpose
This command sets the egress-tpid of a template.
Command Mode
Global configuration mode
Command Mode
set vlan egress-tpid session <1-7> tpid-value <0xHHHH>
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Deletes customer ports.
Description
Port list.
Adds uplink ports.
Deletes uplink ports.
4-408
ZTE Proprietary and Confidential