Set Ipv6Port Enable/Disable; Ipv6Route Default - Zte ZXR10 2900E Series Command Reference Manual

ZXR10 2900E Series Command Reference

4.18.3 set ipv6port enable/disable

Purpose
This command enables or disables an IPv6 layer-3 port.
Command Mode
Layer-3 configuration mode
Syntax
set ipv6port <0>{enable | disable}
Parameter Description
Parameter
<0>
enable
disable

4.18.4 ipv6route default

Purpose
This command adds an IPv6 static route.
Command Mode
Layer-3 configuration mode
Syntax
ipv6route default <ipv6Addr>
Parameter Description
Parameter
<ipv6Addr>
Guidelines
This command cannot be used for route forwarding on a route relay device but can be
used for the default route function of a host.
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Number of an IPv6 layer-3 port. The current value is 0.
Enables the IPv6 layer-3 port.
Enables the IPv6 layer-3 port.
Description
IPv6 address of the next hop.
4-370
ZTE Proprietary and Confidential