Parameter Description
Parameter
port <1-28>
Guidelines
This command without a port number shows all DHCP snooping entries.
Example
The following example shows all DHCP snooping entries:
zte(cfg)#show dhcp snooping binding
DHCP snooping binding table: used = 1, capacity = 256
Hold mode is configured on the following port(s): 10
MAC Address
-----------------
00.d0.d0.00.00.01
4.25.17 show dhcp ip-source-guard
Purpose
This command shows the ip-source-guard configuration of ports.
Command Mode
All configuration modes
Syntax
show dhcp ip-source-guard
Example
The following example shows the ip-source-guard configuration of ports:
zte(cfg)#show dhcp ip-source-guard
Ip source guard is configured on the following port(s):
9-10
4.25.18 show dhcp option82
Purpose
This command shows the configuration of DHCP option82.
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Number of the port whose snooping entries are to be queried
IP Address
Lease(sec)
---------------
----------
192.168.0.1
-
4-441
Chapter 4 Service Configuration
Vlan
Port
Status
Type
----
----
------
-------
1
10
bound
static
ZTE Proprietary and Confidential