Show Qos Priority-Mapping Qos-Profile - Zte ZXR10 2900E Series Command Reference Manual

Parameter Description
Parameter
<1-28>
Guidelines
The command without a port number shows all ports' configurations.
information about default-up, remapping DSCP, remark DSCP/UP, port-to-profile, and
trust mode.
Example
The following example shows the priority mapping configurations of all ports:
zte(cfg)#show qos priority-mapping port
Port Priority Mapping Table:
Flags: DefaultUP - Port Default User Priority, PortProfile - Port Qos Profile
PORT
-------------------------------------------------------------------------------
port-1
port-2
port-3
....../*Omitted*/......

4.14.32 show qos priority-mapping qos-profile

Purpose
This command shows the priority-mapping configuration based on qos-profile.
Command Mode
All configuration modes
Syntax
show qos priority-mapping qos-profile [<0-127>| dscp-to-dscp | dscp-to-profile | up-to-profile]
Parameter Description
Parameter
<0-127>
SJ-20130731155059-003|2013-11-27 (R1.0)
RemarkUP - Enable/Disable Remark Packet UP in accordance with
RemarkDSCP - Enable/Disable Remark Packet DSCP in accordance with Qos Profile
RemapDSCP - Enable/Disable Remap DSCP in accordance with
TrustMode - Port Trust Mode
DefaultUP RemarkDSCP
UP-0 Disable
UP-0 Disable
UP-0 Disable
Description
Port number. Different devices have different port number ranges.
In the syntax, the 2928E device is used as an example.
RemarkUP RemapDSCP
Disable Disable
Disable Disable
Disable Disable
Description
Number of the qos-profile.
4-325
Chapter 4 Service Configuration
It shows the
Qos Profile
DSCP-to-DSCP Table
PortProfile TrustMode
0 TRUST-UP
0 TRUST-UP
0 TRUST-UP
ZTE Proprietary and Confidential