Set Ntp Source; Set Ntp Clock-Period - Zte ZXR10 2900E Series Command Reference Manual

4.23.7 set ntp source

Purpose
This command sets the source IP address used when the switch transmits NTP data
packets.
Command Mode
Global configuration mode
Syntax
set ntp source <A.B.C.D>
Parameter Description
Parameter
<A.B.C.D>
Guidelines
If the entered IP address is 0.0.0.0, the source IP address is restored to the default setting,
which means it is null.

4.23.8 set ntp clock-period

Purpose
This command sets the NTP time synchronization period.
Command Mode
Global configuration mode
Syntax
set ntp clock-period <5-2147483647>
Parameter
Parameter
<5-2147483647>
Default
10 seconds.
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Layer–3 port address
Description
Time synchronization period (seconds)
4-421
Chapter 4 Service Configuration
ZTE Proprietary and Confidential