4.37.5 set loopdetect port protect
Purpose
This command enables or disables port protection when there is a loop on a port.
Command Mode
Global configuration mode
Syntax
set loopdetect port <portlist> protect {enable | disable}
Parameter Description
Parameter
<portlist>
enable
disable
Guidelines
The set loopdetect port detect command with enable is used to block a port when a loop
is detected on the port. The set loopdetect port detect command with disable is used to
activate an alarm but not block a port when a loop is detected on the port.
4.37.6 set loopdetect extend port
Purpose
This command enables or disables the cross-device loop detection on ports.
Command Mode
Global configuration mode
Syntax
set loopdetect extend port <portlist>{enable | disable}
Parameter Description
Parameter
<portlist>
enable
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Port list.
When a loop is detected on a port, block this port.
When a loop is detected on a port, activate an alarm but not block
this port.
Description
Port list.
Enables the cross-device loop detection on ports.
4-541
Chapter 4 Service Configuration
ZTE Proprietary and Confidential