Send Cfm Ltm - Zte ZXR10 2900E Series Command Reference Manual

Parameter Description
Parameter
<1-16>
<1-32>
<1-64>
smep-id <1-8191>
dmep-id <1-8191>
dmep-mac <hh.hh.hh.hh.hh.hh>
dmip-mac <hh.hh.hh.hh.hh.hh>}
<1-200>
<0-400>
<1-10>
Default
The default value of the repeat/size/timeout parameter is 5/0/3.
Example
The following example initiates an LBM detection in md session 1 ma session 1. The
source MEP ID is 1000, and the destination MEP ID is 2000.
zte(cfg)#cfm lbm md-session 1 ma-session 1 smep-id 1000 dmep-id 2000

4.43.26 send cfm ltm

Purpose
This command initiates a linktrace detection.
Command Mode
Global configuration mode
Syntax
cfm ltm md-session <1-16> ma-session <1-32> smep-id <1-8191>{dmep-id <1-8191>| dm
ep-mac <hh.hh.hh.hh.hh.hh>| dmip-mac <hh.hh.hh.hh.hh.hh>}[ttl <1-64>[timeout <5-10>]]
Parameter Description
Parameter
<1-16>
<1-32>
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
MD index.
MA index.
MP session ID, including MEP and MIP, unique within a switch.
ID of the source MEP sending LBM packets.
ID of the destination MEP receiving the LBM packets.
MAC address of the destination MEP receiving the LBM packets.
MAC address of the destination MIP receiving the LBM packets.
Number of the LBM packets.
Data TLV of the LBM packets.
Response waiting time.
Description
MD index.
MA index.
4-589
Chapter 4 Service Configuration
ZTE Proprietary and Confidential