ZXR10 2900E Series Command Reference
Example
The following example creates a user with the name of userx and rights of guest:
zte(cfg)#create user userx guest
4.1.19 set loginauth
Purpose
This command sets the login authentication mode.
Command Mode
Global configuration mode
Syntax
set loginauth {local | radius|local+radius|radius+local|tacacs-plus| local+tacacs-plus | tacacs-
plus+local }
Parameter Description
Parameter
local
radius
local+radius
radius+local
tacacs-plus
local+tacacs-plus
tacacs-plus+local
Default
Local authentication
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Sets local authentication for the login user.
Sets Remote Authentication Dial In User Service (RADIUS)
authentication for the login user.
Local authentication is performed first. If local authentication fails,
RADIUS authentication is performed.
RADIUS authentication is performed first. If RADIUS
authentication fails, local authentication is performed.
Sets Terminal Access Controller Access-Control System Plus
(TACACS+) authentication for the login user.
Local authentication is performed first. If local authentication fails,
TACACS+ authentication is performed.
TACACS+ authentication is performed first. If TACACS+
authentication fails, local authentication is performed.
4-10
ZTE Proprietary and Confidential