Tacacs+ Configuration; Tacacs-Plus Group Enable/Disable - Zte ZXR10 2900E Series Command Reference Manual

Parameter Description
Parameter
<portlist>
force-check timer <15-300>
Guidelines
The period starts when UDLD Recovery begins to restore the port. If no UDLD packet is
received before the timer expires, it is considered that the port is still in failure status.
Default
The forced UDLD monologue detection period is 30 seconds.
Example
The following example sets the forced UDLD monologue detection period to 60 seconds
for ports 9 and 10:
zte(cfg)#udld port 9-10 force-check timer 60

4.39 TACACS+ Configuration

4.39.1 tacacs-plus group enable/disable

Purpose
This command enables or disables a sever group.
Command Mode
NAS configuration mode
Syntax
tacacs-plus group <group-name>{enable|disable}
Parameter Description
Parameter
<group-name>
enable
disable
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Port list
Forced UDLD monologue detection period (seconds)
Description
Name of the TACACS+ server group, containing 1 to 31
characters.
Enables the server group.
Disables the server group.
4-553
Chapter 4 Service Configuration
ZTE Proprietary and Confidential