Set Mac To Static - Zte ZXR10 2900E Series Command Reference Manual

ZXR10 2900E Series Command Reference
Guidelines
The write command can manually trigger an autosave operation.
Default
The autosave time is 360 minutes.

4.7.21 set mac to static

Purpose
This command sets the function of transforming MAC addresses from dynamic to static in
batches.
Command Mode
Global configuration mode
Syntax
set mac to static {port <1-28>| trunk <1-15>| vlan <1-4094>}{enable | disable}
Parameter Description
Parameter
port
<1-28>
trunk
<1-15>
vlan
<1-4094>
enable
disable
Guidelines
If the function of transforming MAC addresses from dynamic to static in batches is enabled,
the MAC addresses that have been learned on a port/trunk/VLAN will be transformed to
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Sets on a port the function of transforming MAC addresses from
dynamic to static in batches.
Port number. Different devices have different port number ranges.
In the syntax, the 2928E device is used as an example.
Sets on a trunk the function of transforming MAC addresses from
dynamic to static in batches.
Trunk ID.
Sets on a VLAN the function of transforming MAC addresses from
dynamic to static in batches.
VLAN ID.
Enables the function of transforming MAC addresses from
dynamic to static in batches.
Disables the function of transforming MAC addresses from
dynamic to static in batches.
4-104
ZTE Proprietary and Confidential