ZXR10 2900E Series Command Reference
5.4.2 set recvpacket
Purpose
This command sets the number of SNMP messages that the SNMP protocol stack can
process in a second.
Command Mode
SNMP configuration mode
Syntax
set recvpacket <0-100>
Parameter Description
Parameter
<0-100>
Default
The number of SNMP messages that the SNMP protocol stack can process in a second
is 40.
Example
The following example sets the number of SNMP messages that the SNMP protocol stack
can process in a second to 80:
zte(cfg-snmp)#set recvpacket 80
5.4.3 set src-ipport
Purpose
This command sets the SNMP source IP address.
Command Mode
SNMP configuration mode
Syntax
set src-ipport <0-63>
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Number of SNMP messages that the SNMP protocol stack can
process in a second.
5-10
ZTE Proprietary and Confidential