Show Port - Zte ZXR10 2900E Series Command Reference Manual

Parameter Description
Parameter
<portlist>
name
statistics
description
multicast-filter
Example
The following example clears names of ports 1, 5, 6, 7 and 11:
zte(cfg)#clear port 1,5-7,11 name

4.2.16 show port

Purpose
This command shows configurations and operational status of ports.
Command Mode
All configuration modes
Syntax
show port [<portlist>]
Parameter Description
Parameter
[<portlist>]
Guidelines
The port name and description will not be displayed if they are not configured.
Example
The following example shows the configuration and operational status of port 1:
zte(cfg)#show port 1
PortId
Description: abc
PortParams:
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Port list.
Clears port names.
Clears port statistics.
Clears port descriptions.
Clears the multicast filtering enable/disable flag and restores the default
status.
Description
Port list. The command without the portlist parameter shows the
configurations and operational status of all ports.
: 1
Chapter 4 Service Configuration
4-55
ZTE Proprietary and Confidential