Set Ztp Port/Trunk Enable/Disable; Set Ztp Vlan - Zte ZXR10 2900E Series Command Reference Manual

Parameter
disable
Default
The ZTP is enabled.

5.6.9 set ztp port/trunk enable/disable

Purpose
This command enables or disables the ZTP on ports.
Command Mode
Cluster management configuration mode
Syntax
set ztp {port <portlist>| trunk <trunklist>}{enable | disable}
Parameter Description
Parameter
port <portlist>
trunk <trunklist>
enable
disable
Default
The ZTP is enabled.
Example
The following example disables the ZTP on port 2:
zte(cfg-group)#set ztp port 2 disable

5.6.10 set ztp vlan

Purpose
This command specifies a VLAN to perform topology collection.
Command Mode
Cluster management configuration mode
SJ-20130731155059-003|2013-11-27 (R1.0)
Chapter 5 Management Configuration
Description
Disables the ZTP.
Description
Port list.
Trunk list.
Enables the ZTP.
Disables the ZTP.
5-43
ZTE Proprietary and Confidential