Show Loopdetect Trunk; Clear Loopdetect - Zte ZXR10 2900E Series Command Reference Manual

ZXR10 2900E Series Command Reference
------
1
For each port, three parameters are displayed:
l VlanId: VLAN ID.
l
isLoop: indicates whether the port encounters loopback in the VLAN.
l
isBlock: indicates whether the port is blocked in the VLAN.

4.37.13 show loopdetect trunk

Purpose
This command shows trunk information in loop detection.
Command Mode
Global configuration mode
Syntax
show loopdetect trunk [<trunklist>]
Parameter Description
Parameter
<trunklist>
Examples
The following example shows the trunk detection status:
zte(cfg)#show loopdetect trunk 1
TrunkId : 1
VlanId
------
1
For each trunk port, three parameters are displayed:
l
VlanId: VLAN ID.
l
isLoop: indicates whether the trunk port encounters loopback in the VLAN.
l isBlock: indicates whether the trunk port is blocked in the VLAN.

4.37.14 clear loopdetect

Purpose
This command clears all loopdetect configurations.
SJ-20130731155059-003|2013-11-27 (R1.0)
------ -------
Yes Yes
Description
Trunk port list
isLoop isBlock
------ -------
No No
4-546
ZTE Proprietary and Confidential