Set Igmp Snooping Monitor-Ring Enable/Disable - Zte ZXR10 2900E Series Command Reference Manual

ZXR10 2900E Series Command Reference
Syntax
set igmp snooping multicast-ring {add | delete} cascade port <portlist>
Parameters
Parameter
add
delete
portlist
Guidelines
The ports on the ring must be configured as cascade ports.
Example
The following example adds cascade ports 51 and 52 to the multicast ring network:
zte(cfg)#set igmp snooping multicast-ring add cascade port 51,52

4.10.7 set igmp snooping monitor-ring enable/disable

Purpose
This command enables or disables the IGMP ring network monitoring function.
Command Mode
Global configuration mode
Syntax
set igmp snooping monitor-ring {enable | disable}
Parameters
Parameter
enable
disable
Guidelines
When the ZESS module finds that the topology changes and then becomes stable, it
notifies the multicast module to send join packets to all routing ports, which accelerates
the recovery of the multicast service.
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Adds cascade ports to the multicast ring network.
Deletes cascade ports from the multicast ring network.
Port list.
Description
Enables the ring network monitoring function.
Disables the ring network monitoring function.
4-134
ZTE Proprietary and Confidential