Set Vbas Cascade-Port Enable/Disable; Set Vbas Enable/Disable - Zte ZXR10 2900E Series Command Reference Manual

4.27.2 set vbas cascade-port enable/disable

Purpose
This command enables or disables the specified ports as VBAS cascade ports.
Command Mode
Global configuration mode
Syntax
set vbas cascade-port <portlist>{enable | disable}
Parameters
Parameter
<portlist>
enable
disable
Guidelines
By default, ports are untrusted.
messages. If switches are cascaded, cascade ports should be configured on the switches
so that VBAS messages can be forwarded properly.
Default
Ports are disabled as VBAS cascade ports.
Example
The following example enables port 8 as a VBAS cascade port:
zte(cfg)#set vbas cascade-port 8 enable

4.27.3 set vbas enable/disable

Purpose
This command enables or disables the VBAS function.
Command Mode
Global configuration mode
Syntax
set vbas {enable | disable}
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Port list.
Enables the specified ports as cascade ports.
Disables the specified ports as cascade ports.
The untrusted ports will drop the received VBAS
4-471
Chapter 4 Service Configuration
ZTE Proprietary and Confidential