5.6.15 ztp start
Purpose
This command manually triggers a topology collection process.
Command Mode
Cluster management configuration mode
Syntax
ztp start
5.6.16 show ztp
Purpose
This command shows the global configuration of ZTP.
Command Mode
All configuration modes
Syntax
show ztp
Syntax
The following example shows the global configuration of ZTP:
zte(cfg-group)#show ztp
Global ZTP
ZTP vlan
ZTP hop
ZTP timer
ZTP hop delay
ZTP port delay : 40 ms
Enabled ZTP ports
Enabled ZTP trunks
5.6.17 show ztp device
Purpose
This command shows the devices collected by topology collection and the devices' status.
SJ-20130731155059-003|2013-11-27 (R1.0)
: disabled
: 100
: 4
: 2 min
: 400 ms
: 1-28
: 1-15
5-47
Chapter 5 Management Configuration
ZTE Proprietary and Confidential