Config Ingress-Acl User-Define Udb - Zte ZXR10 2900E Series Command Reference Manual

Parameter Description
Parameter
<1-828>
name<word>
active
command
deny
passive
permit
policy
rule<1-500>
snmp
time-range

4.13.81 config ingress-acl user-define udb

Purpose
This command sets the matching location of a user-defined byte.
Command Mode
Global configuration mode
Syntax
config ingress-acl user-define udb <1-15> anchor <0-3>[offset <0-31>][data-length<1-6>]
Parameter Description
Parameter
<1-15>
anchor
<0-3>
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
ACL number.
ACL name.
This command shows all rules in valid status in the ACL instance.
This command shows all rules created by command lines in the
ACL instance.
This command shows all deny rules in the ACL instance.
This command shows all rules in invalid status in the ACL
instance. A rule bound with time-range is in passive state beyond
the time range.
This command shows all allow rules in the ACL instance.
This command shows all rules defined with policy actions in the
ACL instance.
Rule ID.
This command shows all rules created by SNMP in the ACL
instance.
This command shows all rules bound with time-range in the ACL
instance.
Description
User-defined byte.
Start location of the user-defined byte.
The value 0 means disabling the user-defined byte function.
4-293
Chapter 4 Service Configuration
ZTE Proprietary and Confidential