Set Arp-Inspection Port Limit - Zte ZXR10 2900E Series Command Reference Manual

ZXR10 2900E Series Command Reference
Parameter
untrust
trust
Guidelines
The trusted ports do not filter ARP messages, meaning that the DAI function is disabled.
A port can support the DAI function only when VLAN and the port's DAI function are both
enabled.
Default
This command sets trusted ports.
Example
The following example sets port 2 as an untrusted port:
zte(cfg)#set arp-inspection port 2 untrust

4.19.4 set arp-inspection port limit

Purpose
This command sets the maximum number of ARP messages that a port processes in each
second.
Command Mode
Global configuration mode
Syntax
set arp-inspection port <portlist> limit {<1-100>| infinite}
Parameter Description
Parameter
<portlist>
<1-100>
infinite
Guidelines
Only untrusted ports support the limitation configuration. The maximum number of ARP
messages that a port processes in each second is limited by software filtering.
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Sets the specified ports as untrusted ports.
Sets the specified ports as trusted ports.
Description
Port list.
The maximum number of ARP messages that a port processes in
each second.
The number of ARP messages that a port processes in each
second is not limited.
4-376
ZTE Proprietary and Confidential