Show Zdp Neighbour Detail; Set Ztp Enable/Disable - Zte ZXR10 2900E Series Command Reference Manual

ZXR10 2900E Series Command Reference

5.6.7 show zdp neighbour detail

Purpose
This command shows the ZDP neighbor detailed information.
Command Mode
All configuration modes
Syntax
show zdp neighbour detail
Example
The following example describes how to show the ZDP neighbor detailed information.
zte(cfg-group)#show zdp neighbour detail
-------------------------------------------------------------
Local-Port
Peer-Device : 00.11.22.33.44.55
Peer-Port
Hold-Time
Platform
Hostname
Version
Version number
Version make date: Aug 13 2010 May 23 2012
Version make time: 21:05:42 11:25:34

5.6.8 set ztp enable/disable

Purpose
This command enables or disables the ZTE Topology Protocol (ZTP).
Command Mode
Cluster management configuration mode
Syntax
set ztp {enable | disable}
Parameter Description
Parameter
enable
SJ-20130731155059-003|2013-11-27 (R1.0)
: Port18
: Port7
: 176
: ZXR10 2952E
: zte
: ZTE ZXR10 2952E Software.
: V2.05.10B10
Description
Enables the ZTP.
5-42
ZTE Proprietary and Confidential