Set Group Delete Member; Set Group Handtime - Zte ZXR10 2900E Series Command Reference Manual

5.6.24 set group delete member

Purpose
This command deletes a member machine.
Command Mode
Cluster management configuration mode
Syntax
set group delete member <idlist>
Parameter Description
Parameter
<idlist>

5.6.25 set group handtime

Purpose
This command sets the time interval for member switches to perform handshakes with the
commander switch.
Command Mode
Cluster management configuration mode
Syntax
set group handtime <1-300>
Parameter Description
Parameter
<1-300>
Default
The default setting is eight seconds.
Example
The following example sets the time interval to one second:
Cmdr.zte(cfg-group)#set group handtime 1
SJ-20130731155059-003|2013-11-27 (R1.0)
Chapter 5 Management Configuration
Description
Member ID
Description
Time interval (seconds) for member switches to perform
handshakes with the commander switch.
5-53
ZTE Proprietary and Confidential