Bridge Mode - Zte MC801A1 Manual

Bridge Mode

Your device supports the bridge mode and you can use this service from
your service provider to access the Internet.
1. Connect your device to the Internet first.
2. Log in to the 5G CPE configuration web page.
Change the operation mode to Bridge Mode and select the WAN
3.
connection network port. The device will be restarted automatically.
NOTE:
Please disconnect from the Internet first and then you can change the
mode.
4. Connect the computer or other cable-connected client to the LAN
port you selected and the client can obtain the IP address from the
WAN DHCP host and connect to the Internet directly.
NOTE:
The cable-connected client connected to the other LAN port or the Wi-
Fi connected clients cannot visit the Internet, but they can communicate
with each other. If you want to change the operation mode, you can use
this client to log in to the configuration page to change the mode.
9