Clear Egress-Acl Basic - Zte ZXR10 2900E Series Command Reference Manual

Syntax
rule <1-500>{permit | deny}{<source-ipaddr><sip-mask>| any}[fragment]
Parameter Description
Parameter
<1-500>
permit
deny
<source-ipaddr>
<sip-mask>
any
fragment
Guidelines
The rule can match IPv4 packets with the specified source IP addresses, any source IP
address, or IP fragment fields.

4.13.47 clear egress-acl basic

Purpose
This command clears a basic egress ACL instance.
Command Mode
Global configuration mode
Syntax
clear egress-acl basic number <400-499>
Parameter Description
Parameter
<400-499>
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Rule number.
If the condition matches, access is permitted.
If the condition matches, access is denied.
IP address of the source network or host transmitting packets. It is
a 32-bit IP address expressed in dotted decimal notation.
Source mask used for sources. It is a 32-bit IP address expressed
in dotted decimal notation.
The any keyword is used as the abbreviation of the source 0.0.0.0
and the source mask 0.0.0.0.
This rule is only valid for fragment messages. For non-fragment
messages, this rule is ignored.
Description
Number of the basic egress ACL instance
4-259
Chapter 4 Service Configuration
ZTE Proprietary and Confidential