Set Dhcp Relay Server Ip - Zte ZXR10 2900E Series Command Reference Manual

ZXR10 2900E Series Command Reference
Parameter
server
<A.B.C.D>
Example
The following example sets DHCP relay information on port 3:
zte(cfg-router)#set ipport 3 dhcp relay agent
zte(cfg-router)#set ipport 3 dhcp relay server 168.1.23.18

4.44.17 set dhcp relay server ip

Purpose
This command sets a global DHCP Relay server IP address.
Command Mode
Global configuration mode
Syntax
set dhcp relay server ip <A.B.C.D>}
Parameter Description
Parameter
<A.B.C.D>
Example
The following example sets the DHCP Relay server address to 168.1.23.180:
zte(cfg)#set dhcp relay server ip 168.1.23.180
zte(cfg)#show dhcp relay
DHCP relay status
DHCP server mode
DHCP server retry
DHCP relay option82:
Global server IP
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Server IP address.
DHCP server address.
Description
IP address of a DHCP server. A maximum of eight IP addresses
can be set.
: disable
: ipport
: 10
disable
: 168.1.23.180
4-600
ZTE Proprietary and Confidential