Debug Protocol Layer3 Arp Enable/Disable - Zte ZXR10 2900E Series Command Reference Manual

ZXR10 2900E Series Command Reference
Syntax
debug protocol layer3 ip port
4.47.13 debug protocol layer3 ip port
Function
This command shows statistical data of an ip port.
Mode
Global configuration
Syntax
debug protocol layer3 ip port <portid>
Parameters
Parameter
<portid>

4.47.14 debug protocol layer3 arp enable/disable

Function
This command enables or disables the debug function of ARP messages.
Mode
Global configuration
Syntax
debug protocol layer3 arp {enable | disable}
Parameters
Parameter
enable
disable
Defaults
By default, the debug function of ARP messages is disabled.
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
ID of a layer 3 ip port.
Description
Enables the debug function of ARP messages.
Disables the debug function of ARP messages.
4-618
ZTE Proprietary and Confidential