ZXR10 2900E Series Command Reference
4.29.9 set zesr link-hello hello-interval
Purpose
This command sets the interval of sending link-hello packets and time-out period of
link-hello packets.
Command Mode
Global configuration mode
Syntax
set zesr link-hello hello-interval < 10-10000> fail-times <3-10>
Parameter Description
Parameter
< 10-10000>
<3-10>
Example
The following example sets the interval of sending link-hello packets on port 1/1:
zte(cfg)#set zesr link-hello hello-interval 10 fail-times 5
4.29.10 set zesr protocol-mac
Purpose
This command sets the mode of destination MAC addresses in protocol packets.
Command Mode
Global configuration mode
Syntax
set zesr protocol-mac { normal | special}
Parameter Description
Parameter
normal
special
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Interval of sending link-hello packets, default: 1000 ms.
Time-out period of link-hello packets, default: 5.
Description
MAC address mode defined in RFC 3619.
MAC address mode defined by ZTE.
4-482
ZTE Proprietary and Confidential