Set Sflow Collector-Address; Set Sflow Version - Zte ZXR10 2900E Series Command Reference Manual

Default
The number of the UDP port used to send SFLOW sampling messages is 6343.
Example
The following example sets the IP address of the SFLOW agent to 10.40.89.50:
zte(cfg)#set sflow agent-address 10.40.89.50

5.7.2 set sflow collector-address

Purpose
This command sets the SFLOW collector.
Command Mode
Global configuration mode
Syntax
set sflow collector-address <A.B.C.D>[udp-port <1-65535>]
Parameter Description
Parameter
<A.B.C.D>
<1-65535>
Default
The number of the UDP port used to send SFLOW sampling messages is 6343.
Example
The following example sets the IP address of the SFLOW collector to 10.40.89.78:
zte(cfg)#set sflow collector-address 10.40.89.78

5.7.3 set sflow version

Purpose
This command sets the format version of SFLOW sampling messages.
Command Mode
Global configuration mode
SJ-20130731155059-003|2013-11-27 (R1.0)
Chapter 5 Management Configuration
Description
IP address of the SFLOW collector.
Number of the UDP port used to send SFLOW sampling
messages.
5-61
ZTE Proprietary and Confidential