Set Port Protect Time; Set Cable-Diag - Zte ZXR10 2900E Series Command Reference Manual

Default
The port protection function is disabled.
Example
The following example enables the port protection function for ports 1, 5, 6, 7, and 11:
zte(cfg)#set port 1,5-7,11 protect enable

4.2.25 set port protect time

Purpose
This command sets the port protection period.
Command Mode
All configuration modes
Syntax
set port <portlist> protect time <1-10>
Parameter Description
Parameter
[<portlist>]
<1-10>
Default
10 minutes.
Example
The following example sets the port protection period for ports 1 and 5:
zte(cfg)#set port 1,5 protect time 3

4.2.26 set cable-diag

Purpose
This command sets the function of virtual cables detecting logs.
Command Mode
All configuration modes
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Port list
Port protection period, in minutes
4-61
Chapter 4 Service Configuration
ZTE Proprietary and Confidential