Egress-Acl Hybrid Rule Type-Any - Zte ZXR10 2900E Series Command Reference Manual

ZXR10 2900E Series Command Reference
Command Mode
Hybrid egress ACL configuration mode
Syntax
rule <1-500>{permit | deny} all
Parameter Description
Parameter
<1-500>
permit
deny
Guidelines
The all rule matches all packets.

4.13.64 egress-acl hybrid rule type-any

Purpose
This command sets the rule that the hybrid egress ACL matches non-IPv6 packets.
Command Mode
Hybrid egress ACL configuration mode
Syntax
rule <1-500>{permit | deny} any {[ether-type <1501-65535>][cos <0-7>][<vlan-id>[<vlan-ma
sk>]][<source-mac><smac-mask>| any][<dest-mac><dmac-mask>| any]}
Parameter Description
Parameter
<1-500>
permit
deny
any
ether-type <1501-65535>
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Rule number.
If the condition matches, access is permitted.
If the condition matches, access is denied.
Description
Rule number.
If the condition matches, access is permitted.
If the condition matches, access is denied.
This rule only matches non-IPv6 packet. IPv6 packet ignores this
rule.
This rule is only valid for the packet with specified ether-type
value. Other packets ignore this rule. The range of ether-type
is 1501–65535. Of which, 2048, 2054 and 34525 respectively
responds to 0x0800, 0x0806 and 0x86DD.
4-274
ZTE Proprietary and Confidential