Set Qos Priority-Mapping Qos-Profile Dscp-To-Dscp; Set Qos Priority-Mapping Port Port-To-Profile - Zte ZXR10 2900E Series Command Reference Manual

ZXR10 2900E Series Command Reference

4.14.4 set qos priority-mapping qos-profile dscp-to-dscp

Purpose
This command sets the mapping relation between DSCPs.
Command Mode
Global configuration mode
Syntax
set qos priority-mapping qos-profile dscp-to-dscp <0-63> to <0-63>
Parameter Description
Parameter
<0-63> (first)
<0-63> (second)
Guidelines
The DSCP after mapping corresponds to the one before mapping one by one, that is, 0 to
0, ..., 63 to 63.
Example
The following example sets DSCP dscp remapping to map 2 to 20:
zte(cfg)#set qos priority-mapping qos-profile dscp-to-dscp 2 to 20

4.14.5 set qos priority-mapping port port-to-profile

Purpose
This command sets the corresponding relation between a port and profile.
Command Mode
Global configuration mode
Syntax
set qos priority-mapping port <1-28> port-to-profile qos-profile <0-127>
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
DSCP field
DSCP field after remapping
4-302
ZTE Proprietary and Confidential