Set Protocol-Protect Alarm Threshold; Set Protocol-Protect Limit - Zte ZXR10 2900E Series Command Reference Manual

ZXR10 2900E Series Command Reference
zte(cfg)#set protocol-protect alarm port 1 disable

4.33.3 set protocol-protect alarm threshold

Purpose
This command sets the 30s protocol alarm threshold of PP.
Command Mode
Global configuration mode
Syntax
set protocol-protect alarm port <portlist>{protocol-name}<0-18000>
Parameter Description
Parameter
<portlist>
{protocol-name}
<0-18000>
Example
The following example sets the alarm threshold of the STP protocol protection on port 1
to 3000:
zte(cfg)#set protocol-protect alarm port 1 stp 3000

4.33.4 set protocol-protect limit

Purpose
This command sets the rate limit value of the protocol packet sent to the CPU that PP
allows per second.
Command Mode
Global configuration mode
Syntax
set protocol-protect limit {group-name}<0-800>
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Port list.
Protocol names, including STP, LACP, IP, arp-request, arp-reply,
802.1x, IGMP, GM, GVRP, VBAS, DHCP, EOAM, PPPoE+,
loopdetect, DHCPv6, MLD, IPv6, LLDP, UDLD, CFM,and
unknown.
30s alarm threshold value. 0 indicates that alarms never occur.
4-506
ZTE Proprietary and Confidential