Config Ingress-Acl User-Define Udb Description; Config Ingress-Acl User-Define - Zte ZXR10 2900E Series Command Reference Manual

ZXR10 2900E Series Command Reference
Parameter
offset
<0-31>
<1-6>
Example
The following example sets the start location of the user-defined ACL named udb1 to L2
(the anchor value 1 means that the start location is L2), sets the offset to 2 bytes, and sets
the matching data length to 2 bytes:
zte(cfg)#config ingress-acl user-define udb 1 anchor 1 offset 2 data-length 2

4.13.82 config ingress-acl user-define udb description

Purpose
This command sets the description of a user-defined byte.
Command Mode
Global configuration mode
Syntax
config ingress-acl user-define udb <1-15> description <string>
Parameter Description
Parameter
<1-15>
description
Example
The following example sets the description of the user-defined ACL named udb1 to aaa:
zte(cfg)#config ingress-acl user-define udb 1 description aaa

4.13.83 config ingress-acl user-define

Purpose
This command creates and configures a user-defined ingress ACL instance.
Command Mode
Global configuration mode
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Sets the offset of the user-defined byte.
Offset.
The data length.
Description
User-defined byte
Description, a maximum of 128 characters
4-294
ZTE Proprietary and Confidential