Zte ZXR10 2900E Series Command Reference Manual page 290

ZXR10 2900E Series Command Reference
Command Mode
Layer 2 ingress ACL configuration mode
Syntax
rule <1-500>{permit | deny} other {[ether-type <1501-65535>| dsap-ssap <0-65535>][co
s <0-7>][<vlan-id>[<vlan-mask>]][<source-mac><smac-mask>| any][<dest-mac><dmac-mask>|
any]}
Parameter Description
Parameter
<1-500>
permit
deny
other
ether-type <1501-65535>
dsap-ssap <0-65535>
cos <0-7>
<vlan-id>
<vlan-mask>
<source-mac>
<smac-mask>
any (first)
<dest-mac>
<dmac-mask>
any (second)
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Rule number.
If the condition matches, access is permitted.
If the condition matches, access is denied.
This rule is only valid for the packets except IP/ARP. IP/ARP
packet ignores this rule.
This rule is only valid for the packet with specified ether-type value.
Ignore this rule for other messages. The range of ether-type is
1501 to 65535. Of which 2048, 2054 and 34525 respectively
corresponds to 0x0800, 0x0806 and 0x86DD.
This rule is only valid for the packet with specified dsap-ssap
value. Ignore this rule for other messages. The range of
dsap-ssap is 0 to 65535.
This rule is only valid for the cos-specified message. Ignore this
rule for other messages. The range of cos is 0 to 7.
This rule is only valid for messages with the specified VLAN ID.
Ignore this rule for other messages. The rule of VLAN ID is 1
to 4094.
Optional VLAN mask. The default value is 0xfff.
Source MAC address of the transmitted packet.
Source MAC mask.
The any keyword is used as the abbreviation of the source MAC
address 00.00.00.00.00.00 and the mask 00.00.00.00.00.00.
Destination MAC address of the transmitted packet.
Destination MAC mask.
The any keyword is used as the abbreviation of the destination
MAC address 00.00.00.00.00.00 and the mask 00.00.00.00.00.00.
4-230
ZTE Proprietary and Confidential