Set Igmp Snooping Vlan Add/Delete Group; Set Igmp Snooping Vlan Add/Delete Smr Port/Trunk - Zte ZXR10 2900E Series Command Reference Manual

Default
The IGMP ring network monitoring function is disabled.
Example
The following example enables the IGMP ring network monitoring function:
zte(cfg)#set igmp snooping monitor-ring enable

4.10.8 set igmp snooping vlan add/delete group

Purpose
This command adds/deletes a static multicast group to/from the specified VLAN and adds
ports/trunks to the static group.
Command Mode
Global configuration mode
Syntax
set igmp snooping vlan <1-4094>{add | delete} group <A.B.C.D>[port <portlist>| trunk <tru
nklist>]
Parameter Description
Parameter
<1-4094>
add
delete
<A.B.C.D>
<portlist>
<trunklist>
Example
The following example adds the static multicast group 230.40.44.167 to VLAN 1 and adds
ports 1 to 10 to the static group at the same time:
zte(cfg)#set igmp snooping vlan 1 add group 230.40.44.167 port 1-10

4.10.9 set igmp snooping vlan add/delete smr port/trunk

Purpose
This command adds/deletes routing ports/trunks to/from the specified VLAN.
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
VLAN ID to/from which a static group is to be added/deleted.
Adds a static group.
Deletes a static group.
Group IP address.
Ports to be added to the static group.
Trunks to be added to the static group.
4-135
Chapter 4 Service Configuration
ZTE Proprietary and Confidential