Set Ztp Hopdelay - Zte ZXR10 2900E Series Command Reference Manual

ZXR10 2900E Series Command Reference
Parameter Description
Parameter
<1-100>
Guidelines
The coordination between portdelay and hopdelay can avoid the generation of a large
amount of ZTP topology collection messages on the network.
Default
The default setting is 20 milliseconds.
Example
The following example sets the delay time to 40 milliseconds:
zte(cfg-group)#set ztp portdelay 40

5.6.14 set ztp hopdelay

Purpose
This command sets the delay time before the device forwards topology collection packets
to the next hop.
Command Mode
Cluster management configuration mode
Syntax
set ztp hopdelay <1-1000>
Parameter Description
Parameter
<1-1000>
Default
The default setting is 200 milliseconds.
Example
The following example sets the delay time to 400 milliseconds:
zte(cfg-group)#set ztp hopdelay 400
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Delay time. The unit is milliseconds.
Description
Delay time. The unit is milliseconds.
5-46
ZTE Proprietary and Confidential