Bridge Mode - Zte MC8010CA Getting Started

Bridge Mode

Your device supports the bridge mode and you can use this service from
your service provider to access the Internet.
1. E nsure that your device can connect to the Internet by using your
nano-SIM card automatically.
2. L og in to the 5G CPE configuration web page.
3. C hange the operation mode to Bridge Mode and select the WAN
connection network port. The device will be restarted automatically.
NOTE:
Please disconnect from the Internet first and then you can change the
mode.
4. C onnect the computer or other cable-connected client to the LAN
port you selected and the client can obtain the IP address from the
WAN DHCP host and connect to the Internet directly.
NOTE:
The cable-connected client connected to the other LAN port or the Wi-
Fi connected clients cannot visit the Internet, but they can communicate
with each other. If you want to change the operation mode, you can use
this client to log in to the configuration page to change the mode.
7