ZXR10 2900E Series Command Reference
Syntax
set cable-diag {enable | disable}
Parameter Description
Parameter
enable
disable
Guidelines
After the function of virtual cables detecting logs is enables, you can view the logs by using
the show cable-diag command.
Default
By default, the function is disabled.
Example
The following example enables the function of virtual cables detecting logs:
zte(cfg)#set cable-diag enable
4.3 POE Configuration
4.3.1 set poe port enable/disable
Purpose
This command enables or disables the POE function for ports.
Command Mode
Global configuration mode
Syntax
set poe port <portlist>{enable | disable}
Parameter Description
Parameter
<portlist>
enable
disable
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Enables the function of virtual cables detecting logs.
Disables the function of virtual cables detecting logs.
Description
Port list.
Enables the POE function.
Disables the POE function.
4-62
ZTE Proprietary and Confidential