Set Stp Instance Port/Trunk Priority - Zte ZXR10 2900E Series Command Reference Manual

Syntax
set stp instance <0-63>{add | delete} vlan <vlanlist>
Parameter Description
Parameter
<0-63>
add
delete
<vlanlist>
Guidelines
The corresponding relationships between instances and VLANs is one of the bases for
domain classification. Devices in a domain have the same corresponding relationship.
Example
The following example adds VLANs 1, 5, 6, 7 and 12 to instance 1:
zte(cfg)#set stp instance 1 add vlan 1,5-7,12

4.12.21 set stp instance port/trunk priority

Purpose
This command sets the priority of a port or trunks in an instance.
Command Mode
Global configuration mode
Syntax
set stp instance <0-63>{port <1-52>| trunk < trunklist >} priority <0-240>
Parameter Description
Parameter
<0-63>
port <1-52>
trunk < trunklist >
<0-240>
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Instance ID.
Adds VLANs to an instance.
Deletes VLANs from an instance.
VLAN list.
Description
Instance ID.
Port number. Different devices have different port number ranges.
In the syntax, the 2952E device is used as an example.
Trunk list.
Priority.
4-205
Chapter 4 Service Configuration
ZTE Proprietary and Confidential