Show Trunk Vlan; Show Lacp - Zte ZXR10 2900E Series Command Reference Manual

4.9.10 show trunk vlan

Purpose
This command shows VLANs to which the specified trunks belong.
Command Mode
All configuration modes
Syntax
show trunk <trunklist> vlan
Parameter Description
Parameter
<trunklist>
Example
The following example shows the VLAN to which trunk 1 belongs:
zte(cfg)#show trunk 1 vlan
TrunkId
Tagged in vlan
Untagged in vlan : 1

4.9.11 show lacp

Purpose
This command shows LACP global configurations.
Command Mode
All configuration modes
Syntax
show lacp
Example
The following example shows LACP global configurations:
zte(cfg)#show lacp
Lacp is enabled.
Lacp priority is 1.
Load-balance is based on L2 hash mode.
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Trunk list
: 1
:
Chapter 4 Service Configuration
4-127
ZTE Proprietary and Confidential