Set Alarm - Zte ZXR10 2900E Series Command Reference Manual

Parameter Description
Parameter
statistics <1-65535>
<1-28>
<name>
vaild
underCreation
createRequest
invalid
Example
The following example sets the data source of the statistics group whose index is 10 to
port 1:
zte(cfg-snmp)#set statistics 10 datasource 1
The following example sets the data source of the statistics group whose index is 10 to
tom:
zte(cfg-snmp)#set statistics 10 owner tom
The following example sets the status of the statistics group whose index is 10 to invalid:
zte(cfg-snmp)#set statistics 10 status invalid

5.5.3 set alarm

Purpose
This command sets an alarm group.
Command Mode
SNMP configuration mode
Syntax
set alarm <1-65535>{interval <1-65535>| variable <mib-oid>| sampletype {absolute | delta}|
startup {rising | falling | both}| threshold <1-65535> eventindex <1-65535>{rising | falling}|
owner <name>| status {valid | underCreation | createRequest | invalid}}
Parameter Description
Parameter
alarm <1-65535>
SJ-20130731155059-003|2013-11-27 (R1.0)
Chapter 5 Management Configuration
Description
Index of the statistics group.
Port number. Different devices have different port number ranges.
In the syntax, the 2928E device is used as an example.
Name of the owner.
The status of the statistics group is valid.
The status of the statistics group is underCreation.
The status of the statistics group is createRequest.
The status of the statistics group is invalid.
Description
Index of the alarm group.
5-31
ZTE Proprietary and Confidential