Clear Banner - Zte ZXR10 2900E Series Command Reference Manual

Syntax
set banner endwith <string>
Parameter Description
Parameter
<string>
Default
@#$%
Example
The following example sets the banner end identifier to 123:
zte(cfg)#set banner endwith 123
zte(cfg)#write
Saving file, please wait a minute...
Done !

4.1.76 clear banner

Purpose
This command clears the banner displayed on the start screen.
Command Mode
Global configuration mode
Syntax
clear banner
Example
The following example clears the banner displayed on the start screen:
zte(cfg)#clear banner
zte(cfg)#write
Saving file, please wait a minute...
Done !
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
end identifier for entering the banner displayed on the start screen.
The maximum length is 4 characters.
4-39
Chapter 4 Service Configuration
ZTE Proprietary and Confidential