DHCP option82 sub-option information on port 1:
Circuit-ID: Disabled
Remote-ID: Enabled
Format: Cisco
DHCP option82 mode information on port 1: Default
4.44.15 show dhcp relay option82 device
Purpose
This command shows device information, including ANI and remote-ID.
Command Mode
All configuration modes
Syntax
show dhcp relay option82 device
Example
The following example shows device information:
zte(cfg)#show dhcp relay option82 device
DHCP relay option82 sub-option information on device:
Access-Node-Identifier: -
Remote-ID: Cisco
4.44.16 set pport dhcp relay
Purpose
This command sets DHCP relay information on an IP port.
Command Mode
Layer-3 configuration mode
Syntax
set ipport <0-63> dhcp relay {agent | server <A.B.C.D>}
Parameter Description
Parameter
<0-63>
agent
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Layer-3 interface ID.
Agent of the DHCP Relay.
4-599
Chapter 4 Service Configuration
ZTE Proprietary and Confidential